Installing the Lend-A-Hand # AM-200 using a backing plate would disperse the force across a wider area than if simply installed using bolts into the metal/fiberglass panels, so spreading that weight across a larger area is how you avoid damaging the wall. If you can't locate a door stud to install this into, your best bet would be to use a backing plate that was larger than the area that you're installing the handle to; this unit is 24" tall, so I'd recommend using a plate that was at least... view full answer...
The factory brake controller port for your 2019 Coachmen Mirada that's built on the Ford F-53 should be located on the left hand side of the steering column support, which is near the emergency brake pedal. I have attached an image that gives a clearer view of this.
The Plug-In Adapter # 3035-P that you referenced is the correct harness to allow for a plug-and-play install using this port with a Tekonsha brake controller like the Prodigy P2 # 90885 (great choice) that you were looking at. view full answer...
Most brake controllers such as the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 come with a wiring harness that has blunt cut wires on one end and a plug on the other end that goes to the controller. You will need to attach the blunt cut wires on the above harness to the blunt cut wires on your motorhome via butt connectors in order to install a brake controller. There is not a plug-in connector that installs on the end of the motorhome's blunt cut wires and then plugs into... view full answer...
Go To Results